High Efficiency Extra Large Bearing Induction Heater with Heating Capacity of Up to 1000 KGS

Product Detail

Application 

Applied to railway, petroleum machinery, steel, wind power and other industries. Proper bearing installation is essential to safeguard maximum bearing life.


Characteristics

1. One set machine consists of host and control part.

2. Composed of iron core, winding, movable yoke and moving platform.

3. Automatic demagnetization: <2A/CM

4. Insulating material shell, safe and reliable using process;

5. Time control: 0-99 minutes, Temperature control: 0-300?;

6. Different size yokes optional : 68mm,90mm,116mm;

7. Certifications: CE, ISO9001, EMC,FCC.

Technical parameters

Model	WTR-60-4
Power	60KVA
V/HZ	380V/50HZ
Currency	160A
Pole area	150*166mm
Pole height	660mm
Max. weight of the workpiece	1000KG
Bore size of the workpiece	120mm
Max. out size of the workpiece	900mm
Max. width of the workpiece	300mm
Temperature Control - Highest - Magnetic probe - Digital display	300? PT100 Yes
Time Control - Time range -  Digital display	0-99’ Yes
Demagnetization standard	Automatic demagnetization <2A/CM
Heater Dimension(mm)	2000*740*1100mm
Heater weight	750kg
Yoke iron core cross section (mm) Optional	68x68x620 ; 90x90x620 ; 116x116x620
Heater style	One set with moving car

Product advantage

Quality guarantee from every detail

(1) 100% high quality copper induction coil;

(2) Temperature -10 ? -400 ? insulation double glass envelope technology;

(3) Military standard 35W270 high silicon steel sheet;

(4) Schneider electrical accessories; 

(5) Temperature -50?-300? epoxy rods platinum thermal resistance.

Multiple protection makes it safer and more environmental

(1) Fully enclosed insulated coil minus the risk of the exposed coil;

(2) E multilayer fiber ribbon;

(3) F grade epoxy insulating paint;

(4) Special processing technology minimize the radiation and noise;

(5) WTR 300-500? temperature-resistant insulated gloves.

FAQ

1. Q: What test we will do before the machine leave factory?

A: Before machine leave factory, our engineer will mainly test the following 3 parts.

(1) Test the currency to be standard

(2) Test the demagnetization effect to be standard

(3) Test the noise, <85DB within one meter.

2. Q: How to operate the bearing heater?

A: Each bearing heater is with a operating manual, operating video is also available.

3. Q: How to guarantee our machine to be safe?

A: Bearing heater raw material & technology

(1) Fine copper coils, more heat insulation

(2) -10?~400? insulation double glass envelope technology

(3) Electrical accessories are from Schneider

(4) Temperature -50?-300? epoxy rods platinum thermal resistance,better magnetic properties

(5) Fully enclosed insulated coil

(6) E multilayer fiber ribbon, F grade epoxy insulating paint, multiple protection

(7) Special processing technology makes the radiation and noise to be minimum

(8) WTR brand temperature-resistant insulated gloves

(9) Each WTR bearing induction heater passed the CE, ISO9001, EMC,FCC.

4. Q: How about the operation precautions for safe?

(1) Bearing induction heater will produce an induction magnetic field which will influence or weaken the effect of the medical device such as pacemaker or hearing-aid, thus it will hurt health. Please do not operate the machine or stay within 5m away from the machine when wear such device.  

(2) Do not operate the induction heater in area existing explosion hazard.

(3) It is very important to conduct correct maintenance and handling. It will cause machine fault or have personal injury if operate out of user manual.

(4) Sensitive electronic equipment(such as mobile, watch, computer) will be influenced by the magnetic field, do not use them around the heater.

(5) Check whether the power and voltage are accordance with the heater nameplate, confirm the ground connection is good.

(6) Avoid touching the heated bearing directly, please use high temperature resistant gloves to carry the bearings.

Rely on the excellent product quality and thoughtful professional service, WTR brand bearing induction heater has been appointed as sole supplier by Fortune 500.